ReGenesis: Resurrection Series Volume I

We are proud to announce the release of the ReGenesis Kit by Deathwish Modz at 11am (GMT) on Monday 27th February 2023. This is the first instalment of the Resurrection Series: Volume I with 3 more to follow.

 

The Dual Coil 28mm ReGenesis RDA has a distinctive 2 post design. The Inverted crucifix posts are not only aesthetically pleasing but also functional. The posts ensure the juice flows to the cotton to keep wicking consistent. The posts also have squonk ports at the base, which allows the RDA to be used in squonk mode, using the squonk pin included in the box.

Being 28mm diameter, allows ample room for big beefy coils. We have tested this with up to 4mm ID coils, meaning you can have big chunky, flavoursome coils with tonnes of clouds.

The unique posts are sat raised on a dome with a moat. The dome ensures juice flows into the moat along the outer edge of the RDA deck where your cotton sits, whether you drip or squonk, to ensure your cotton is always saturated minimising instances of dry hits and ensuring a perfect vape every time.

The moat holds 3.5ml of juice offering consistent cotton saturation and drastically decreases the chances of spitback. Never waste a drop.

The airflow carries on the inverted crucifix aesthetics. The adjustable stepped and directional airflow perfectly aligns with your coils, thus giving you an optimal vape based on your airflow preferences when the cap is locked in place.

We have included a high level removable ultem chamber condenser to cater for individuals’ preferences. Due to the high position of the chamber, it has no bearing on the airflow coming in, its sole purpose is to reduce the chamber size.
 

The single 21700 ReGenesis mechanical mod is the first released single battery side fire by Deathwish Modz. This mod is engineered to offer minimal voltage drop via its two-pronged contact firebar making it extremely hard hitting and consistent with every puff.

Coupled with its unique ergonomic design and coffin shaped aesthetics, this makes the ReGenesis the perfect all-day carry.

Milled from a single billet of aluminium, sandblasted and anodized creating a durable and impressive finish. The engravings are hand painted, making the artwork come to life. (excluding Murdered Out). The two-part heat-treated copper fire bar has been gold plated to ensure maximum conductivity while reducing maintenance but ensuring minimal voltage drop

The ergonomic design of the mod allows the user to hold the mod comfortably in the hand, with your fingers resting in a pleasant position on the fire button.
The fire button is designed so that pressure applied anywhere on the bar results in a smooth and even press every time, no matter which finger you use.

Designed in a way where the mod can be completely disassembled in under 5 minutes. The internals are neatly put together using a sled which is simple to remove for any maintenance. Held in place using high quality screws, once these screws are removed the sled should slide out without friction. This will expose the copper firebar for a quick clean.

 

For a more thorough clean a few more screws allow access to all parts. Making every section of the circuit accessible and visible. This level of maintenance ensures optimal performance. Supporting up to 30mm RDA’s without any overhang. This enables versatility to use any previous Deathwish Modz RDA’s such as the 30mm Deathtrap.

We are committed to offering full support for all our products via our online support form which we will endeavour to answer with 1 working day. Including extensive warranties, a comprehensive selection of spare parts and tutorial video blogs. We hope you enjoy this mod kit as much as we enjoyed making it, bringing life back to Deathwish Modz has been our privilege.

PRODUCT DIMENSIONS

IN THE BOX